In this article, you will be enlightened about handicap showers, why you should have handicap showers in Jacksonville and how you can install a handicap shower in your home.
Why you should have handicap showers in Jacksonville
Bathing should be a comforting time for everyone regardless of age or disability. Everyone wants to feel clean and have a sense of freshness and smelling nice. That should be the first reason you should have a handicap shower.
Other reasons could be;
-To prevent slips, trips or falls while in the bathroom
-For easy access for everyone
-To provide more space to manoeuvre safely
-To provide comfort in the bathroom
-To accommodate everyone regardless of condition
-To provide support while bathing.
All about handicap showers
The American with disabilities act (ADA) laid out some laws or rather guidelines to aid in the installation of shower facilities for the disabled. They include;
– Grab bars – also known as rails or grip bars, they are heavy duty material attached to the bathroom wall to provide support for all regardless of your weight.
– Shower seats– stainless steel seats that allow you to clean up as you are seated, could be swivelled around or folded away.
–Shower ramps – this is especially for those who use wheelchairs, it works just like those other ramps in different areas, schools, shopping store or outside your home.
–Shower threshold – this is lowering of the shower stall to as low as 4 inches to allow one to step over without any difficulty.
– Wet rooms– if one can accommodate the whole bathroom to be a shower room, then the wet room is designed to give as much space for safe manoeuvre as possible.
There are 3 very common types of handicap showers that use these above components to provide comfort and space for the handicapped. They include;
– The transfer shower – its size is 30 inches by 36 inches with an l- shaped seat by the wall and vertical and back wall grab bars for support. The threshold is usually between 2 to 5 inches high.
– Roll-in showers – most people would call it to walk in showers as they have either zero barriers or very low threshold. This kind is much more flexible as you can walk in with the wheelchair into the shower cubicle with ease. It also has folded seats on the side walls and grab bars on both walls and back wall. The opening to the shower is about 30 to 60 inches wide.
– Alternate roll on showers – very similar to the roll on the shower but this kind contains short walls across the front side of the shower stall. Usually where the seats in the cubicle should have been. It has both back wall and side wall grab bars with a 36 inch opening to the stall.
What to consider when installing handicap showers
Before installing the handicap showers, you are going to have to think of the remodelling that will happen and if you can accommodate the changes adequately.
Bathroom safety is a major factor in our homes as the accidents will probably get you running to the ER every now and then. The common causes of accidents that could occur include; wet floors, small spaces, inaccessible showers and highly placed bathroom utilities.
Below are some of the things to look out for as you think of installing the handicap showers in Jacksonville.
-The space to accommodate either a fixed or a rolling shower seat as these can be used by most individuals.
– For those individuals using wheelchairs or a Walker, you could have the curbless showers to avoid slips or falls. This type of shower can actually be used by all members of the family.
– The opening to the shower should be at the same level to the floor as the slope to the drainage system. A recommended size is 36 inches wide for the transfer seats and 60 inches wide for the wheelchairs.
– If space can allow, the walk-in tubs would be a good choice as you could enter the shower cubicle without having to climb over.
– Grab bars are a mandatory requirement for all the handicap showers as they are the main support feature for the handicapped. You could install them at the sidewall to assist with standing or seating with 3 bars for the roll in showers and 2 bars for the transfer showers.
– The flooring will also need remodelling to incorporate non-slip floors to prevent falling once water has touched the floor. Use a good textile tile or a slatted wood over the concrete floor for the extra precaution.
– For temperature purposes, you can add up the anti-scald mixing valves to maintain the water temperatures and volume at a safe level even with changes in the pressure. You could set the maximum to 120 degrees Fahrenheit.
– Always look over where you will be placing the bathroom utilities like soap, washcloths and scrubs to be easily accessible to the handicapped.
– Lighting in the shower is also a major factor to look at. You could choose to use the glass walls rather than the curtains to add up the brightness levels in the shower.
– For a seated bather, you could install a handheld showerhead where the water will spray where the user wants it to. Rather than the drop down shower that requires you to be directly below the water to receive the water.
– There should be an easy reach for the towels shelf and hook and a clear place to easy dry themselves off.
These are just but a few recommendations to look at as you are installing the handicap showers.
Where to get handicap showers in Jacksonville
If you have not installed these showers, you should definitely consider as they are not limited to the disabled only.